QX-MOTOR 50A/70A/90A/120AUnderwater ship model electric regulation water-cooled brushless waterproof two-way electric regulation
Note: because this series of electric regulator has glue filling process, it does not support warranty. Please purchase with caution. Support charge revision.
QX ship model anti water and electricity regulation has high performance price ratio, adopts high-performance and low-power AVR 8-bit ATmega168 Series MCU, and the maximum working frequency is 20MHz;
● suitable for driving all kinds of three-phase brushless motors on the market, especially for remote control ship models;
● support the maximum 210K erpm speed of brushless motor;
● the starting acceleration can be set, the throttle response speed is fast, and has a very stable speed regulation linearity, which is suitable for various model ships;
● it has a variety of protection functions: low voltage protection, over temperature protection, throttle signal loss protection, locked rotor protection, etc. Better protect the normal and safe use of the equipment;
● automatically identify the number of battery cells, and the low-voltage protection threshold can be set to meet personalized needs;
● good power on safety performance: when the power is turned on, the motor will not be started immediately no matter the accelerator of the remote control is in any position;
● cycle menu setting, simple operation, compatible with all remote control operation settings and support programming card settings;
● built in BEC with steering gear, high load power and low power consumption;
● glue filling and waterproof, supporting short-term immersion work (please dry it after immersion to avoid product damage);
● aluminum alloy water cooling and heat dissipation system, which can effectively slow down the temperature rise;
QX motor 50A marine brushless electric regulator
1. Continuous output current: 50A
2. BEC type: linear mode
3. BEC output: 5.5v/5a
4. Input: 2-6s Lipo
5. Weight: 107g
6. Inner diameter / outer diameter of water cooling nozzle: Ф 3.0 / Ф five
7. Dimension (including the length extending out of the water cooling nozzle): 86x38x22mm
8. Application: suitable for hull with length < 55cm QX motor 70A marine brushless electric regulator 1. Continuous output current: 70A 2. BEC type: linear mode 3. BEC output: 5.5v/5a 4. Input: 2-6s Lipo 5. Weight: 111g 6. Inner diameter / outer diameter of water cooling nozzle: Ф 3.0 / Ф five Extension length of water cooling nozzle (including 8x27): 862mm 8. Application: suitable for hull with length < 70cm QX motor 90a marine brushless electric regulator 1. Continuous output current: 90a 2. BEC type: linear mode 3. BEC output: 5.5v/5a 4. Input: 2-6s Lipo 5. Weight: 118g 6. Inner diameter / outer diameter of water cooling nozzle: Ф 3.0 / Ф five 7. Dimension (including the length extending out of the water cooling nozzle): 86x38x22mm 8. Application: suitable for hull with length < 100cm Qx-motor120a marine brushless electric regulator 1. Continuous output current: 120a 2. BEC type: linear mode 3. BEC output: 5.5v/5a 4. Input: 2-6s Lipo 5. Weight: 170g 6. Inner diameter / outer diameter of water cooling nozzle: Ф 3.0 / Ф five 7. Dimension (including the length extending out of the water cooling nozzle): 113x45x22mm 8. Application: suitable for hull with length < 120cm
